Sperry Marine Navipilot 4000
OTOPİLOT

The highly reliable NAVIPILOT 4000 ensures continuous self-tuning adaptation for accurate steering and efficient fuel consumption, which is unique to all other autopilots in the marine industry. The NAVIPILOT 4000 Marine Autopilot uses advanced ship steering control network technology to steer a ship safely and efficiently. The innovative NAVIPILOT 4000 is capable of tuning itself to adapt automatically to the ship’s load characteristics and weather conditions.

Teklif Formu

The self-tuning adaptive function is an integral part of all NAVIPILOT 4000 configurations. This feature enables the system to continuously monitor performance and automatically adjust control settings, rudder gain and counter rudder as required to keep the tuning optimized even if the vessel’s behaviour is affected by changes in load or trim, or as sea conditions change, to continually provide the best possible steering performance and efficiency. The NAVIPILOT 4000 TRACK and NAVIPILOT 4000 TRACK HSC versions are equipped with the Track Control capability, when interfaced to a Northrop Grumman Sperry Marine Integrated Bridge System or VisionMaster FT ECDIS.

Environment
Ambient temperature range
Operation
-15° C to +55° C
Storage
-25° C to +70° C
Protection grade
Installed
IP 32 to DIN 40050
Environmental testing
To EN 60945 (IEC 945 +A1)
Power Requirements
24VDC(18Vto36V)
Power consumption
10 W max.
Reverse polarity protection
Built-in
Inputs
Rudder angle feedback signal
± 10 V ^= ± 120° max. selectable rudder angle, potentiometer resistance 2kΩ
External steering system
± 10 V ^= ± 120° max. rudder angle
Flux gate for magnetic compass
Sine/cosine, Sperry Marine product
NAV/TRACK interface
Serial interface for track steering via VisionMaster FT ECDIS or standard waypoint steering with a position receiver
Speed input
200 p/nm or IEC 61162-1
180° turn command
Port and starboard
180° rotation of heading display (for ferries)
Gyro / magnetic selection
Override status
Mute
Status signals
AUTO, NFU, Helm, Remote, Ext. System
Set heading and rudder limit or rate or radius control by joystick or pushbutton
Heading
Heading gyro
Two IEC 61162-1 HEHDT at 10 Hz
Heading magnetic
HCHDT or HCHDM or HCHDG at 10 Hz
Outputs
DC solenoid valves
Outputs
Two for port, two for starboard (solid-state relays)
Type plus or minus switching
Voltage
12 VDC to 110 VDC
Rating
2.0 A max.
Additional outputs
Optional
AC solenoid valves
Outputs
Two for port, two for starboard (solid-state relays)
Voltage
24 VAC to 230 VAC
Rating
1.0 A max.
Additional outputs
Optional
Isolated proportional analogue output
Outputs
Two isolated analogue outputs proportional rudder order to proportional rudder error
Voltage
±10V DC, max. 20 mA or
Current
4.20 mA
Additional outputs
Optional
  • Sperry_Marine_Navipilot_4000 - Brochure İndir
  • Sperry_Marine_Navipilot_4000 - Operator's Manual İndir