Innovating the user-friendly communication tool
The SAILOR RT5022/RT5020 VHF is a highly reliable and user-friendly VHF, not only for everyday communication, but also for critical situations where lives may depend on it.
Combining these important qualities with Thrane & Thrane’s advanced technologies the result is a state-of-the-art VHF containing revolutionary features and functionalities.
Developed in cooperation with users
There is only one way to design a VHF that really meets the requirements of demanding users. That is, to develop the VHF in cooperation with them. Therefore, a dedicated team of experienced engineers, as well as teams of Man/Machine- Interface specialists, worked alongside users for the entire development process of the SAILOR RT5022/RT5020 VHF.
All ideas and input gathered from all over the world were then carefully evaluated and used in the development of the SAILOR RT5022/RT5020 VHF. Finally the prototypes were tested by users in on-board installations to their full satisfaction.
General
Channels
All Int., US and BI channels.
Up to 30 private channels in 3 separate
banks designated F, P or L. Each bank
contains 10 private channels
Channel spacing
25 KHz / 12.5 KHz
Operation modes
RT5022 simplex/semi-duplex
RT5020 simplex/duplex
Modulation
G3EJN for Telephony
G2B for DSC
Aerial connectors
Standard 50Ω female SO239
Temperature range
-15°C to +55°C
Supply voltage
12V to 24V DC nominal
Supply voltage range
10.8V to 31.2V DC
Frequency range
RT5022 Rx/Tx 149.300 - 163.750 MHz
RT5020 Rx/Tx 150.800 - 157.425 MHz
Rx 160.625 – 163.600 MHz
Frequency stability
Better than ± 3 ppm
Receiver
Sensitivity for 20 dB
RT5022 -121 dBm typical
SINAD CCITT weighted
RT5020 -119 dBm typical
AF rated Power Internal L.S.
5W
Output for External L.S.
5W (8
Distortion
Less than 5%
S/N ratio
Better than 43 dB
Spurious emission
Less than 0.25 mW
Spurious response rejection
Better than 74 dB
Intermodulation response
Better than 73 dB
Co- channel rejection
Better than -10 dB
Adjacent channel selectivity
Better than 74 dB
Blocking level
Better than 99 dBuV
Duplex spurious response att
RT5020 better than 74 dB
Duplex desentization
RT5020 below 3 dB
Transmitter
RF output power
High: 25W +0 dB / -0.5 dB
Low: 0.85W +0.5 dB / -1 dB
Adjacent channel power
Better than 75 dB
Conducted spurious emission
RT5022 better than 0.1 uW
RT5020 better than 0.25 uW
Distortion
RT5022 better than 5%
RT5020 better than 3%
S/N ratio
Better than 46 dB
DSC facilities
DSC operation
According to Rec. ITU-R M.541-9 and Rec. ITU-R M.689-2
DSC protocol
According to Rec. ITU-R M.493-11 Class A
Navigator interface
According to IEC 61162-1
GLL, RMC, ZDA, GGA, VTG, GNS
Symbol error rate
Better than 1*10-2 @ -121 dBm or 0.20 μV p.d.
Modulation
1700Hz±400Hz
1200 baud
Frequency error
Better than ± 1 Hz
Residual modulation
Better than -26 dB
Dimensions
Transceiver dimensions
Height: 100 mm (3.94")
Width: 200 mm (7.87")
Depth: 210 mm (8.27")
(H and W same as RT4822/RT4722 and SKANTI VHF 1000/1100)
